Building Types
80x150 Indoor Sports Facility
- Width
- 80 ft
- Length
- 150 ft
- Floor area
- 12,000 sq ft
- Perimeter
- 460 ft
Quick dimensions
At a Glance
Width
80 ft across the gable end.
Length
150 ft along the sidewall.
Floor area
12,000 sq ft of clear floor.
Eave height
24 ft at the sidewall on the stored profile.
Configuration
How This Building Is Configured
Configuration summary
| Building type | Indoor Sports Facility |
|---|---|
| Footprint | 80 ft × 150 ft |
| Floor area | 12,000 sq ft |
| Eave height | 24 ft |
Planning
Footprint & Space Planning
Footprint
Width and length are chosen together: width is usually fixed by what has to fit side by side, length by how many bays are needed.
Height
Eave height affects door options, storage height and how open the interior feels.
Access
Where vehicles and people enter changes the whole interior layout, so access is settled before anything else.
Doors and openings
Opening width, height and position are specified with the supplier; they affect the frame and the wall bracing.
Site
Slope, drainage, access for delivery and erection, and the foundation are confirmed for the actual property.
Expansion
Extending along the length is usually simpler than changing the width later, which is worth deciding up front.
Use
How a 80×150 Indoor Sports Facility May Be Used
Courts
Clear-span width determines how the main space can be arranged and seated.
Training
Ancillary rooms are commonly placed along one side or at one end.
Recreation
Entrance and exit placement follows the occupancy requirements for the use.
Example
Example Configuration
Access
Doors & Access Considerations
Opening width
Across a 80 ft gable end, the practical opening width is limited by the frame and confirmed with the supplier.
Opening height
A 24 ft eave sets the ceiling on door height before any frame change.
Drive-through
Matching openings at both ends avoid reversing, at the cost of usable wall.
Similar sizes
Other Sizes for a Indoor Sports Facility
80′ × 130′
10,400 sq ft
80′ × 170′
13,600 sq ft
70′ × 150′
10,500 sq ft
Related
Related Building Types
Example configuration — for planning purposes only.
FAQ
Common Questions
80 ft × 150 ft is 12,000 square feet of floor area before any interior partitions.
Length is usually adjusted in bay increments, and width is a larger design change. Both are confirmed with the supplier for the final design.
Site preparation, foundation and erection are commonly quoted separately from the building package. Confirm the scope of any quote you receive.
Compare nearby sizes
Related footprints for this building type
Each page works through one footprint for one building type.
Overview
A 80x150 indoor sports facility planned as a continuous turf-style floor planned as one uninterrupted surface
This page is ordered around programming, because at this footprint the question is not how much floor there is but how many groups it can hold at once and how each of them reaches its zone.
The footprint holds 1 field zone — 1 across by 1 deep — and leaves 38 feet of depth for an end zone for equipment, goals and nets that would otherwise be stored against the playing surface.
What distinguishes 80x150 is depth behaviour: 1 row along 150 feet after 12 feet of circulation, with 38 feet unaccounted for at the end of the run. Cleaning, maintenance and inspection all need reach, and reach is planned in the gaps rather than in the modules.
A 80 by 150 footprint is a clearly directional plan: 12,000 sq ft enclosed by 460 ft of wall, at a 1.9:1 length-to-width proportion. Along its 150 ft dimension it takes 1 run of field zones at 100 ft, leaving 50 ft over — the 50 ft is where the argument about this size actually happens. Taken purely as arithmetic, 80 by 150 gives 1 field zones across the 80 ft dimension once 12 ft is reserved for movement, and 1 deep along the 150 ft dimension. Run as a a continuous turf-style floor planned as one uninterrupted surface, 8 ft across is below the 12 ft this use needs to be worth planning, so there is no end storage, so equipment stands at the edge of the surface and reduces the usable field Supervision sightlines from a single position are worth more to daily operation than most interior finishes.
At 80x150 the operating question is a specific one: is the surface continuous enough to be used as one field, and where does the equipment that comes with it live? That is a different question from the one a indoor sports facility of another shape has to answer, and it is why this footprint is planned as a continuous turf-style floor planned as one uninterrupted surface rather than as generic covered area.
Areas, perimeter, roof area, ridge height, slab volume and the field zone counts on this page are computed from the stored 80x150 record and this platform's planning module for the indoor sports facility category.
Configurations
Configuring 1 field zone at 80x150
Nominal bay division computes to 6 bays at about 25 feet, narrower than the 60-foot module — so frame lines land inside positions and the interior has to be set out from the columns. Temperature swing on a steel shell drives condensation decisions that outrank most layout preferences.
A single row means nothing is trapped: every position faces the opening directly, which is this footprint's advantage over a deeper building of the same width. The count of working positions, not the headline area, is the figure that survives contact with the operation.
Length extends usefully; width rarely does, because a wider field is a different activity rather than a larger one. The extendable end should be the one opposite the storage block.
Configured as a continuous turf-style floor planned as one uninterrupted surface, 80x150 is judged on whether the 1 field zone it holds match the operation, and on whether the 20 feet of spare width leaves the route this mode depends on.
- Does the work need racking or work zones on both sides with a full vehicle lane down the middle, or does it need a second lane that this 80-foot span cannot give?
- Is the 150-foot length being bought for depth, or for the repeated bays — a long repeating bay sequence, so segment boundaries are set by bay lines rather than by walls?
- Which sport sets the clear height, and does every zone meet it?
- How does the floor subdivide, and does the structure allow the dividing lines you want?
Bay division shown here is a planning module computed from the stored length. Actual bay spacing is set by the manufacturer's frame design for the building.
Allocation
Dividing the floor for a continuous turf-style floor planned as one uninterrupted surface
The programming pattern this floor could equally be scheduled as is a single activity floor scheduled for one group at a time: the margin is minimal, so equipment and waiting participants stand at the edge of the active surface. Dividing the 12,000 sq ft by the 60 by 100 ft field zone gives roughly 1 positions before circulation is deducted a second time for cross movement. Whether the plan keeps 1 or drops to 1 comes back to the question this footprint is really answering: is the surface continuous enough to be used as one field, and where does the equipment that comes with it live?
Depth arithmetic leaves a working end zone here. 3,040 square feet sits past the last row, which is why 80x150 tends to be planned with an end zone for equipment, goals and nets that would otherwise be stored against the playing surface designed in rather than added later. A building that cannot be reversed out of is a building that gets used in one direction only.
The 20 feet of spare width runs the whole 150-foot length — 3,000 square feet of wall strip. It earns its keep as shelving, staging or a walking route, not as another field zone. Noise from this floor reaches the office, the neighbours and the yard, and separation is a plan decision.
Compared with a 80 by 110 of the same width, the extra depth here adds run rather than reach: it buys about 1 field zones in line, and every position past the second is retrieved by moving what stands in front of it. Spent as a square 110 by 110 instead, the same 12,000 sq ft would stand 1 field zones across rather than 1, and would trade this plan's length for parallel access. That is the width-against-depth decision this footprint has already made. A building of this size behaves like a small yard under a roof: zones need to be defined, signed and left alone, or they migrate. Use alternates between whole-surface sessions and multiple small-group sessions on the same continuous floor. The plan supports both by keeping the surface unobstructed rather than by dividing it permanently. A sports building's real capacity is set by its schedule and its changeover time, not by its floor area. That movement pattern, not the 12,000-square-foot total, is what decides whether the leftover 38 feet is useful here.
Usable area
How the 12,000 square feet divides at 80x150
Computed field zone fit for a 80x150 indoor sports facility
| Measure | Computed at this footprint |
|---|---|
| Field zones across the 80-foot width | 1 at a 60-foot module |
| Leftover width | 20 ft (3,000 sq ft as a full-length strip) |
| Rows along the 150-foot length | 1 at a 100-foot module after 12 ft of circulation |
| Leftover depth | 38 ft (3,040 sq ft across the width) |
| Total field zones | 1 |
| Share of floor committed | 50% |
Module footprint used here is 60 by 100 feet, this platform's planning module for a indoor sports facility. It is not a code minimum or an engineered clearance.
Example allocation of the 150-foot length — planning model, not survey data
| Zone | Length along the building | Computed area |
|---|---|---|
| Main assembly area | 93 ft | 7,440 sq ft |
| Circulation and entry | 30 ft | 2,400 sq ft |
| Support rooms and utility | 27 ft | 2,160 sq ft |
Shares applied to the stored 150-foot length; areas computed against the 80-foot width.
Module footprints and allocation shares come from this platform's use typology and are published as example planning models. They are not recommendations and do not describe a majority of projects.
Openings
Openings for 1 field zone across
Openings are the pinch point here. With 20 feet of spare width the gable cannot host 1 separate doors, so access is either shared or moved to the 150-foot sidewall. Set the openings before the interior, because the openings cannot move and the interior can.
The 80 ft ends and the 150 ft sides offer very different opening budgets: 80 ft of end wall has room for one wide opening or two modest ones, while 150 ft of side wall can carry several without the openings competing. On this plan the deciding factor is whether continuous surface planning or field length planning should be the first thing reached from the door.
Framed-opening sizes, headers and the structure around them are engineered for the specific building. Confirm every opening with the door supplier and the building manufacturer before ordering.
Height
Interior height for a 80x150 indoor sports facility
Span drives headroom at 80x150: 80 feet of width on a 4:12 pitch puts 37.3 feet over the middle and 24 feet at the walls, so where a tall item stands matters as much as how tall it is. Access, not area, is what makes a plan feel small once it is in use.
Height on a 80 ft span is a separate decision from the 150 ft length, and it is the span that sets the frame's behavior. Raising the eave over 12,000 sq ft affects every bay along the 150 ft dimension, so the test is whether continuous surface planning genuinely needs the extra clear height or only the floor area.
Ventilation across 12,000 square feet at this height: sustained high activity across a large volume, so air handling is sized for the busiest scheduled period.
Clear height below purlins, bracing and lighting is lower than the eave height. The usable figure comes from the manufacturer's framing for the selected building.
Cost drivers
Quantities that move the estimate at 80x150
Quantities, not prices, are publishable here: roof cladding runs 12,649 square feet — 5% above the 12,000-square-foot floor at a 4:12 pitch — with 222.2 cubic yards of nominal slab beneath it. Where the building sits on the site changes how much of this floor is genuinely reachable.
The surface system dominates the estimate and scales directly with area, which makes the proportion decision — length against width — the largest cost lever on this plan.
- clear height set by the most demanding activity
- the clear span and how the floor subdivides
- zoned lighting and control
- equipment storage rooms opening onto the floor
Comparison
What changes at adjacent footprints
Computed comparison of nearby footprints for a indoor sports facility
| Footprint | Floor area | Field zones |
|---|---|---|
| 60x80 | 4,800 sq ft | 0 (1 x 0) |
| 40x120 | 4,800 sq ft | 0 (0 x 1) |
| 50x100 | 5,000 sq ft | 0 (0 x 0) |
| 60x100 | 6,000 sq ft | 1 (1 x 1) |
| 50x120 | 6,000 sq ft | 0 (0 x 1) |
Areas computed from each stored size record; field zone counts computed with the same 60 by 100 foot planning module.
- 60x80 moves the count from 1 to 0 field zones (1 across by 0 deep), which is the reason to choose between them.
- 40x120 moves the count from 1 to 0 field zones (0 across by 1 deep), which is the reason to choose between them.
- 50x100 moves the count from 1 to 0 field zones (0 across by 0 deep), which is the reason to choose between them.
Nearby footprints read for a indoor sports facility: exact change in area and in planning field zones
| Footprint | Area Δ | % Δ | Field zones at that footprint | What changes for this use |
|---|---|---|---|---|
| 100x100 | −2,000 sq ft | −16.7% | 2 (2 x 1) | +1 field zone on the same planning module. |
| 80x120 | −2,400 sq ft | −20% | 4 (2 x 2) | +3 field zones on the same planning module. |
| 100x150 | +3,000 sq ft | +25% | 4 (2 x 2) | +3 field zones on the same planning module. |
| 60x150 | −3,000 sq ft | −25% | 1 (1 x 1) | Same field zone count on this planning module; the difference is circulation and stored depth, not capacity. |
Areas are arithmetic on two stored size records; field zone counts use this platform's 60 by 100 foot planning module and are not a capacity statement.
Because this footprint is planned as a continuous turf-style floor planned as one uninterrupted surface, the useful next reads are different from the ones a differently shaped indoor sports facility suggests: continuous surface planning, field length planning, equipment end zone.
Visualization
Reading the 80x150 footprint as a indoor sports facility
FAQ
Questions about 80x150 indoor sports facility projects
It depends on the highest ball flight or activity envelope of the most demanding sport booked. The stored configuration computes to 37.3 feet at the ridge, but the eave is the number that governs anything standing near a wall.
Reserving 12 ft across the 80 ft dimension for movement leaves 68 ft of working width, which takes 1 field zones at 60 ft. Along 150 ft it takes 1 runs at 100 ft. That is 1 positions out of 12,000 sq ft, and the remainder is circulation, walls and the margin every plan needs. Whether that count is enough depends on is the surface continuous enough to be used as one field, and where does the equipment that comes with it live. These are planning figures computed from the footprint, not a quoted layout.
The footprint holds 1 field zone — 1 across by 1 deep — and leaves 38 feet of depth for an end zone for equipment, goals and nets that would otherwise be stored against the playing surface. Those counts use a 60 by 100 foot planning module with 12 feet allowed for circulation, so a different module changes the answer.
In a defined end zone with its own access, never along the sides. Side storage steadily narrows the usable surface and is difficult to reverse once the habit is set.
A 6-inch slab across 12,000 square feet computes to 222.2 cubic yards before thickened edges, piers or waste. The final design comes from the foundation engineer.
Methodology
How this page was produced
Sources and methodology
Find Steel Buildings dimensional records
Find Steel Buildings · Primary platform dataset · Tier 1 — code authority, standards body, primary dataset or manufacturer engineering
Supports: Stored nominal width, length, eave height, roof pitch and slab thickness for this subject.
International Building Code and International Residential Code
International Code Council · Model code · Tier 1 — code authority, standards body, primary dataset or manufacturer engineering
Supports: The framework of adopted codes and local amendments that decides permitting, separation and opening requirements. Cited as the governing framework, never as a local requirement.
- Dimensional figures: Width, length, eave height, roof pitch and nominal slab thickness come from this platform's stored record for the subject. Floor area, perimeter, wall area, roof area, ridge height and slab volume are computed from those inputs rather than transcribed.
- Field zone fit: Counts, leftover strips and per-module areas are computed from the stored 80x150 record against this platform's 60 by 100 foot planning module for the indoor sports facility category, with 12 feet allowed for circulation. The module is editorial planning typology, not a code minimum or an engineered clearance.
- Allocation model: Zone shares come from this platform's use typology for assembly and gathering space and are applied arithmetically to the stored 150-foot length.
- Allocation and layout models: Layout splits are arithmetic on the stored footprint, published as example allocation models. They are not survey findings and do not describe what buyers most often choose.
- Clearance and opening guidance: Clearance and opening statements are planning guidance. Final dimensions depend on the selected door system, header detail and the manufacturer's engineering for the building.
Methodology notes
- Prices: No price figure appears on this page. Cost data is published on this platform only with a documented inclusion basis, a collection date and a named source.
Drawn to scale
Plans and dimensions
Every drawing below is generated from the exact dimensions for this building, so proportions and areas are accurate.
Compare 80x150 indoor sports facility configurations
Review the allocation models for this footprint side by side, then estimate the configuration you intend to build.